What kind of oil does a 2001 Subaru Outback take?

What kind of oil does a 2001 Subaru Outback take?

SAE 5W-30

What oil does a Subaru Outback take?

synthetic oil

How many quarts of oil does a Subaru Legacy take?

Subaru Oil Guide:

Model Subaru Oil Required Capacity
Subaru Legacy & Outback 2013 – 2021 0W-20 Synthetic Oil 4.4 – 5.1 Quarts
Subaru Legacy Turbo 2005 – 2010 5W-30 Conventional Oil 4.5 Quarts
Subaru Legacy Turbo 2011 – 2012 5W-30 Synthetic Oil 4.5 Quarts
Subaru Legacy & Outback 6 Cyl. 2002 – 2019 5W-30 Conventional Oil 6 – 6.9 Quarts

What oil does a 2016 Subaru Legacy use?

How do you change the oil on a Subaru Legacy?

How to Change Your Own Oil

  1. Step 1: Jack Up Your Vehicle.
  2. Step 2: Remove the Undertray.
  3. Step 3: Unscrew the Drain Plug and Drain the Oil.
  4. Step 4: Remove the Oil Filter.
  5. Step 5: Reinstall the Drain Plug and Filter.
  6. Step 6: Refill the Oil.
  7. Step 7: Check the Oil Level.

How many miles should you change your oil on a new Subaru?

6,000 miles

How much oil does a 2012 Outback take?

Engine Oil. SAE 5W-30 is preferred. Capacity: 4.4 quarts.

What type of oil does a 2013 Subaru Outback take?

the preferred oil grade for the 2013 subaru outback 2.5l is 0w-20 synthetic. the preferred oil grade for the 3.6 models is 5w-30.

How do you reset the oil life on a 2014 Subaru Outback?

To reset the oil life warning or maintenance light in your 2014 subaru outback vehicle, turn the ignition key to the “on” position and depress the gas pedal slowly three times. release and start your vehicle and the oil light should indicate a reset.

How do you reset the oil life on a Subaru Outback?

To reset the oil life warning or maintenance light in your 2017 subaru outback vehicle, turn the ignition key to the “on” position and depress the gas pedal slowly three times. Release and start your vehicle and the oil light should indicate a reset.

Does Subaru have an oil change light?

It’s ideal to lift the hood and check your oil level every month or two when you fill up on gas. Depending on which model Subaru you have, a low oil indicator light will illuminate. If this happens, then you should schedule an oil change as soon as possible.

How do you reset the oil light on a Subaru Outback?

To reset the change oil light, simply turn on the ignition to run but don’t start the engine. Then use the left hand side controls on the steering wheel to select the up or down arrows until you highlight the maintenance menu. Then pull the i/set switch toward you which triggers the reset process.