Table of Contents
- 1 What are the different types of rulers?
- 2 How do rulers work?
- 3 Why is a ruler called a ruler?
- 4 What is the use of protractor?
- 5 What are the lines on a ruler called?
- 6 Why do rulers have a metal edge?
- 7 How do you use steel rule?
- 8 What is a dash amount?
- 9 What is a tape measure used for?
- 10 What is a half Metre rule?
- 11 What are the uses of T Square?
- 12 What is the least count of Metre rule?
- 13 What is a bench rule used for?
- 14 How long is a meter stick?
- 15 What is the least count of steel rule?
- 16 How long is a ruler in cm?
- 17 What can you measure with a meter stick?
- 18 How are plastic rulers made?
- 19 What is math ruler?
- 20 What do you understand by measurement?
- 21 What does a graduated cylinder measure?
- 22 What is ruler in MS Word?
- 23 How long is a ruler in feet?
What are the different types of rulers?
Answer: A meter rule is a device which is used to measure length of different objects. A meter rule of length 1m is equal to 100 centimeters (cm). On meter rule each cm is divided further in to 10 divisions which are called millimeters (mm). So, a meter rule can measure up to 1mm as smallest reading.
How do rulers work?
Each foot is broken down into inches. Each inch is broken down into 15 smaller marks, equaling 16 marks in total for each inch on the ruler. The longer the line on the surface of the ruler, the bigger the measurement is. Ranging from 1 inch to 1/16 of an inch, the lines decrease in size as the unit of measurement does.
Why is a ruler called a ruler?
Why is a ruler (measuring device) called a ruler? "Ruler" is just a 15th century variation of "rule," which comes, via French, from Latin "regula," which meant a measuring stick, a diminutive derived from "regere," to straighten, lead, or guide. The word "rule," comes from the same source, but is more metaphorical.
What is the use of protractor?
A protractor is a measuring instrument, typically made of transparent plastic or glass, for measuring angles. Most protractors measure angles in degrees (°). Radian-scale protractors measure angles in radians. Most protractors are divided into 180 equal parts.
What are the lines on a ruler called?
The larger lines with numbers are centimeters, and the smallest lines are millimeters. Since millimeters are 1/10th of a centimeter, if you measure 7 marks after a centimeter, it is 1.7 centimeters long. English rulers, are much more difficult to read.
Why do rulers have a metal edge?
Metal is used for more durable rulers for use in the workshop; sometimes a metal edge is embedded into a wooden desk ruler to preserve the edge when used for straight-line cutting. … Practical rulers have distance markings along their edges. A line gauge is a type of ruler used in the printing industry.
How do you use steel rule?
When the rule is laid flat on the part, you cannot get an accurate measurement because of parallax. Be sure the steel rule is straight across the dimension you want to measure. If the steel rule is at an angle, the measurement cannot be accurate. Another use for a rigid steel rule is to check the flatness of a part.
What is a dash amount?
Measured out in drops, using a precise, milliliter-dropper like the ones used to dispense medicine, a dash is about 10 single drops. Measured out in teaspoons, a dash would be 1/5 teaspoon, or as I discovered in my kitchen, between 1/8th teaspoon and 1/4 teaspoon.
What is a tape measure used for?
A tape measure or measuring tape is a flexible ruler and used to measure distance. It consists of a ribbon of cloth, plastic, fibre glass, or metal strip with linear-measurement markings. It is a common measuring tool.
What is a half Metre rule?
A uniform half metre rule balances horizontally on a knife edge at 29 cm mark when a weight of 20 gf is suspended from one end. … (ii) The centre of gravity of a uniform half meter rule is 25 cm. The rule balances horizontally on a knife edge at 29 cm mark when a weight of 20 kgf is suspended from one end.
What are the uses of T Square?
A T-square is a tool used in technical drawing, primarily as a guide for drawing straight horizontal lines on a drafting table. It can also be used in conjunction with a set square to draw vertical and angled lines. Its name is derived from its resemblance to the letter 'T'.
What is the least count of Metre rule?
What is the value of least count of meter scale? Least count of a any scale depends upon its number of divisions. And if along with cm denotion mm is also represented on the same scale then it's least count in one unit of metre will be 1/1000=0.001.
What is a bench rule used for?
Bench rules are usually 1000mm (40") long. They are typically used for jobs such as measure long lengths of fabric. A bench rule is suitable for frequent use when the rule needs to stay in place for measuring.
How long is a meter stick?
Remember that you can use centimeters and millimeters if the object is smaller than a piece of paper. Those items are easily measured with a ruler. A meter stick is a little over 3 feet long, because a meter is approximately 3.2 feet. A meter stick closely compares to a yard stick.
What is the least count of steel rule?
If we use a metre scale for measurementof length, it may have graduations at 1 mm division scale spacing or interval. A Vernier scale on caliper may have a least count of 0.01 mm while a micrometer may have a least count of 0.001 mm. The least count error occurs with both systematic and random errors.
How long is a ruler in cm?
And the conversion for the inch to the centimeter is 1 inch = 2.54 cm exactly. So, in the same vCalc conversion equation (Length Conversion), if you input 1 inch, you get out 2.54 cm. So, he rephrased answer to your question is: there are 30.48 centimeters on a standard 12 inch ruler.
What can you measure with a meter stick?
A meter stick measures one meter and shows only metric units of measurement of millimeters and centimeters. Meter sticks are used to measure objects that are larger than a piece of paper. Remember that you can use centimeters and millimeters if the object is smaller than a piece of paper.
How are plastic rulers made?
Plastic rulers are manufactured by injection molding process. … The image of rulers, protractors and set squares seen in the link mentioned in the question are made of Polystyrene (PS) or Polymethylmethacrylate (PMMA) and are printed using black ink after the process of manufacturing.
What is math ruler?
A tool used to rule straight lines and measure distances. This ruler is marked in cm (centimeters) along the top and inches along the bottom.
What do you understand by measurement?
In the classical definition, which is standard throughout the physical sciences, measurement is the determination or estimation of ratios of quantities. Quantity and measurement are mutually defined: quantitative attributes are those possible to measure, at least in principle.
What does a graduated cylinder measure?
A graduated cylinder, measuring cylinder or mixing cylinder is a common piece of laboratory equipment used to measure the volume of a liquid. It has a narrow cylindrical shape. Each marked line on the graduated cylinder represents the amount of liquid that has been measured.
What is ruler in MS Word?
The ruler is a measurement tool found with some software programs that allow the program's user to align graphics, text, tables, or other elements on a page. When enabled, the horizontal ruler appears at the top of the document, and the vertical ruler is on the left-side of the document.
How long is a ruler in feet?
Using the prime, 1 ft can be written as 1′. The foot is most commonly measured using either a standard 12" ruler or a tape measure, though there are many other measuring devices available.. Feet are sometimes referred to as linear feet, which is simply the value of a length in feet, learn more.